[SID 2017] BOE, 세계 최초 진정한 의미의 QLED 전시

BOE

BOE는 25일(현지시각) 미국 로스앤젤레스에서 열린 SID 2017에서 세계 최초로electroluminescence quantum dot 기술이 적용된 QLED 디스플레이 2종(5 inch, 14 inch)을 선보여 관람객의 큰 관심을 끌었다.

BOE의 5 inch QLED 디스플레이는 320 x 240 (80ppi) 해상도를 가지며 LTPS TFT가 적용되었다. 한편, 14 inch QLED 디스플레이의 해상도는 960 x 540 (80ppi)이며, oxide TFT가 적용되었다.

<BOE가 전시한 5 inch (좌), 14 inch (우) QLED 디스플레이>

 

이번에 공개된 BOE의 QLED 디스플레이가 특별한 까닭은 그간 삼성전자의 ‘photoluminescence quantum dot 기술’이 적용된 SUHD TV와는 달리, 백라이트가 없는 ‘electroluminescence quantum dot 기술’이 적용된 디스플레이기 때문이다.

일반적으로 quantum dot을 이용하는 디스플레이는 메커니즘은 2가지(photoluminescence quantum dot 기술과 electroluminescence quantum dot 기술)로 분류된다.

Photoluminescence quantum dot 기술은 외부 광에 의해 자극된 물질이 다시 빛을 내는 메커니즘을 갖는다. 삼성전자는 이 기술을 백라이트에서 나오는 청색 빛에 QD sheet를 붙인 형태로 활용하여 LCD TV에 적용하고 있다.

이에 반해 electroluminescence quantum dot 기술은 전기를 가했을 때 스스로 빛을 내는 메커니즘으로 빛을 내는 재료만 무기물이고 구조는 OLED와 흡사하다.

유비산업리서치 이충훈 대표는 과거 analyst column을 통해 ‘photoluminescence quantum dot 기술은 디스플레이의 색 재현율을 향상하기 위해 현재 LCD TV에 적용하고 있다’며, ‘LCD TV로서 최상의 제품임에 틀림없지만, electroluminescence quantum dot 기술이 적용된 것이야 말로 진정한 의미의 QLED 디스플레이다’라고 말한 바 있다.

BOE 관계자는 QLED 디스플레이에 대해 ‘기존의 OLED 구조에 유기물 대신 무기물을 사용하여 신뢰성을 향상시켰으며, 색재현율이 OLED 대비 넓은 것이 특징’이며, ‘100% 잉크젯 프린팅 방식으로 제작하는 QLED는 증착법으로 제작하는 OLED에 비해 제조 비용 절감과 대면적에 유리하다’고 설명했다.

그간 업계에서는 QLED 디스플레이가 양산에 적용되기까지는 최소 5년 이상 걸릴 것으로 예상하고 있기 때문에, BOE의 이러한 연구결과 electroluminescence quantum dot 기술이 적용된 QLED의 상용화를 얼마나 앞당길 수 있을지 또는 디스플레이 산업에 어떠한 영향을 미칠지 귀추가 주목된다.

[SID 2017] BOE, Unveiled the World’s First True QLED

BOE attracted the big attention of visitors by unveiling the world’s first 2 types of QLEDs(5 inch, 14 inch) based on electroluminescence quantum dot technology.

BOE’s 5 inch QLED has a resolution of 320 x 240 (80ppi) with LTPS TFT. On the other hands, 14 inch QLED has a resolution of 960 x 540 (80ppi) with oxide TFT.

 

<BOE’s 5 inch (left) & 14 inch (right) QLED display>

 

BOE’s QLED display this time is special because it is an ‘electroluminescence quantum dot technology’-based display without backlight, unlike Samsung Electronics’ SUHD TV based on ‘photoluminescence quantum dot’.

In general, quantum dot-based displays are categorized into two types of mechanisms: photoluminescence quantum dot and electroluminescence quantum dot.

Photoluminescence quantum dot technology has a mechanism where the material stimulated by external luminescence emits light again. Samsung Electronics applies this technology to its LCD TV by using the QD sheet attached on blue light emitting from backlight.

On the other hands, electroluminescence quantum dot technology has a mechanism that emits itself when electricity is put, and its material is inorganic and structure is similar to OLED.

Choong Hoon Yi, president of UBI Research said in analyst column that “photoluminescence quantum dot technology is applied to current LCD TVs to improve color reproduction of display. It must be the best product as LCD TV, but electroluminescence quantum dot-based display is a true QLED display”

A BOE employee explained “QLED display improves its reliability by using inorganic matters for existing OLED structure instead of organic matters, featuring better color gamut than OLED. 100% inkjet printing-based QLED is better in terms of manufacturing cost saving and large scale, compared to deposition-based OLED”.

The industry has expected that it will take more than 5 years to mass-produce QLED display, so according to BOE’s research, there’s a keen interest on how much the commercialization of electroluminescence quantum dot-based QLED is moved up or how much it influences the display industry.